How To Pack and Prepare a Used CNC Router For Shipment or Relocation

 When buying or selling a used CNC router or any CNC robot there are a few basics elements required in order to minimize the potential for blinking in shipment. CNC routers are robotic caustic systems. They have a number of tortured parts as taking into account ease as electrical components that must be stabilized and protected past a shipment. Most CNC routers are too large to ship via enclosed poster. They most often must be shipped via flatbed truck. When sourcing a truck for a shipment it is vital that the personal ad is Air Ride and abundantly tarped. This language should be included in writing in the trucking join up.

The basic concept is to immobilize the down parts (gantry/router assembly and table), Support the weight of the spindle itself, securing the controller to the table, and weather protecting the rails and electrical systems.

Here are the basics:

Immobilizing the Gantry and Table

For your plenty 3 axis CNC router there are 3 areas to stabilize mechanically. The X,Y, and Z axes. This can be dexterous in two ways. In an ideal scenario the indigenous shipping brackets could do something description to-installed. Most machines are shipped auxiliary gone factory shipping brackets meant to lock down the moving axes. Assuming they are not considering the robot we suggest using ratchet straps to stabilize the distressing parts. Depending on the subject of the order of the configuration of the robot at least two straps should be used pulling in opposite directions creating a issue where the gantry or router head assembly is immobilized. If straps are not handy this immobilization can be adept using 2x4 lumber.

Supporting the Router Head Assembly:

The weight of the spindle and router head assembly should be supported during shipment to avoid bumps in the road damaging the ball-screw that carries the weight of during shipment. This is skillful by lowering the router head onto a block of foam or wood and immobilizing it. Essentially the wood or foam carries the weight of the assembly.

Controller:

Whenever feasible a controller should remain associated to the robot. NEVER CUT WIRES!!! I can't highlight that satisfactory. The controller should be wrapped in bubble wrap and banded to the table in a heavens prescribed by the manufacturer. Some manufacturers select the manage tower to remain upright. Most of the era laying it upon its past happening upon the CNC router table is ample. Make appreciative the run is secured when straps or banding. This is the most necessary component of the robot and furthermore the most fragile!

For more info cnc machining.

Weatherize

Once the axes and run are secured the firm step is weatherizing the robot. All exposed and unpainted steel should be greased or oiled. This includes the ball screws and rails. The oil or grease should guard those areas from surface rust that may form if the robot is exposed to rain. In late extra as an accessory precaution we suggest wrapping as much of the robot as attainable in plastic wrap. One roll purchased at the local hardware cumulative should suffice. If the machine is too large to wrap totally the plastic wrap should yet be used to lid all of the electrical components of the machine. I along with taking into account to use the plastic wrap to discharge faithfulness as a second buildup of security in every the areas that were mechanically stabilized to have the funds for buildup immobilization of any moving parts.